McAfeeV6.0 - eMuleTurk


Opening Ports in the McAfee V6.0 Firewall Plus (ref; http://firewalling.com/personalfirewalls/McAfeeV6.0FirewallPlus.htm) Step 1: McAfee V6.0 Firewall Plus programını açın. Open up the McAfee V6.0 Firewall Plus program. Step 2: Sayfanın altınadaki System Services simgesini çift tıklayın. Aşağıdaki sayfa açılacaktır. Double click the System Services icon located close to the bottom of this page. This will open the following page. Step 3: Bu sayfada büyük bir System Services kutusu olacaktır. System Services kutusunda Programlar ve bu programlar için yönlendirilmiş (açılmış) portların listesi görülecektir. eMule için port açmak için Add butonuna tıklayın. Aşağıdaki Edit Port Configuration ekranı çıkacaktır. There should be a large System Services box on this page. The system services box displays a list of forwarded ports, along with a description of the service that is forwarded on those ports. Go ahead and click the Add button below that box, to open a new set of ports. Step 4: Edit Port Configuration ekranına aşağıdaki değerleri girin. Program Name ; eMule Incoming TCP/IP port ; 4662 Outgoing TCP/IP port ; 4662 Incoming UDP port ; 4672 Outgoing UDP port ; 4672 Description ; eMule Yaptıklarınızı kaydetmek için OK tılayın. Enter the name of the program you are opening ports for into the Program Name box. It doesn't really matter what this name is, but something that will remind you of why these ports are opened is a good idea. The next part really depends on the protocol used by the ports you want to forward. If you are unsure of the port protocols check the Ports list page or the software manufacture's homepage. The ports you are forwarding should go into the Incoming and Outgoing port box with the proper protocol specified. If you need to forward both TCP and UDP ports, then you would enter those ports into the coresponding boxes. For instance, let's say you need to forward port 50 and it is using the tcp and udp protocol. You enter port 50 into the Incoming TCP/IP ports, Outgoing TCP/IP ports, Incoming UDP ports, and Outgoing UDP ports boxes. As another example, say you were opening port 75 using the TCP protocol. Well you would enter port 75 into the Incoming TCP/IP ports and Outgoing TCP/IP ports. Multiple ports can be entered into each of these boxes. Here is how you would do it. You can enter ports as a list like 50,55,61, a range like 500-600, or a combination of both 50,55,61,500-600. Go ahead enter the ports to open into the appropriate boxes. You can enter a short description into the Description box. A description would give you a better idea why these ports are forwarded. It may also be the only thing that shows up on the System Services page. When you are finished with this configuration, click the Ok button to save your settings. Step 5: System Services penceresine geri döneceksiniz. Bu pencerede de OK tıklayın. İşlem Tamam ;) Meret ;) You should now be back at the System Services window. Go ahead and click the Ok button here as well. And that is it. Those ports should now be open.

Opening Ports in the McAfee V6.0 Firewall Plus

(ref; http://firewalling.com/personalfirewalls/McAfeeV6.0FirewallPlus.htm)

Step 1:
McAfee V6.0 Firewall Plus programını açın.

Open up the McAfee V6.0 Firewall Plus program.

Step 2:
Sayfanın altınadaki System Services simgesini çift tıklayın. Aşağıdaki sayfa açılacaktır.

Double click the System Services icon located close to the bottom of this page. This will open the following page.

Step 3:
Bu sayfada büyük bir System Services kutusu olacaktır. System Services kutusunda Programlar ve bu programlar için yönlendirilmiş (açılmış) portların listesi görülecektir. eMule için port açmak için Add butonuna tıklayın. Aşağıdaki Edit Port Configuration ekranı çıkacaktır.

There should be a large System Services box on this page. The system services box displays a list of forwarded ports, along with a description of the service that is forwarded on those ports. Go ahead and click the Add button below that box, to open a new set of ports.

Step 4:

Edit Port Configuration ekranına aşağıdaki değerleri girin.

Program Name ; eMule

Incoming TCP/IP port ; 4662

Outgoing TCP/IP port ; 4662

Incoming UDP port ; 4672

Outgoing UDP port ; 4672

Description ; eMule

Yaptıklarınızı kaydetmek için OK tılayın.

Enter the name of the program you are opening ports for into the Program Name box. It doesn't really matter what this name is, but something that will remind you of why these ports are opened is a good idea. The next part really depends on the protocol used by the ports you want to forward. If you are unsure of the port protocols check the Ports list page or the software manufacture's homepage. The ports you are forwarding should go into the Incoming and Outgoing port box with the proper protocol specified. If you need to forward both TCP and UDP ports, then you would enter those ports into the coresponding boxes. For instance, let's say you need to forward port 50 and it is using the tcp and udp protocol. You enter port 50 into the Incoming TCP/IP ports, Outgoing TCP/IP ports, Incoming UDP ports, and Outgoing UDP ports boxes. As another example, say you were opening port 75 using the TCP protocol. Well you would enter port 75 into the Incoming TCP/IP ports and Outgoing TCP/IP ports. Multiple ports can be entered into each of these boxes. Here is how you would do it. You can enter ports as a list like 50,55,61, a range like 500-600, or a combination of both 50,55,61,500-600. Go ahead enter the ports to open into the appropriate boxes. You can enter a short description into the Description box. A description would give you a better idea why these ports are forwarded. It may also be the only thing that shows up on the System Services page. When you are finished with this configuration, click the Ok button to save your settings.

Step 5:
System Services penceresine geri döneceksiniz. Bu pencerede de OK tıklayın.

İşlem Tamam ;)

Meret ;)

You should now be back at the System Services window. Go ahead and click the Ok button here as well.

And that is it. Those ports should now be open.